In
a previous section it has already been transferred to the access
of photons through glass, but I'll explain it again as a reminder.
The photons hitting the glass surface in large quantities, due to friction, the increase in energy of the electrons take over glass, and therefore emit a large proportion, do not pass through the glass wall on the other side, however, the smaller of them in large quantities photon is pushed into the bottle.
The photons hitting the glass surface in large quantities, due to friction, the increase in energy of the electrons take over glass, and therefore emit a large proportion, do not pass through the glass wall on the other side, however, the smaller of them in large quantities photon is pushed into the bottle.
The radiation results in large quantities of the resulting plasma, which emitted photons, which
are continuously impacting
photons cause re-assembly
taken up, so
photons generated by the impacting photons,
they are in the vial getting indenting force, and eventually pass through the opposite
side, and there radiate, plasma is
generated.
I
wrote it
again, because of the principle of operation of the electron microscope, these few
lines are important moments.
The electron microscope is an optical photons pass through the lens, and the voltage increases with increasing quantities. The plasma is formed passing through the lens, which again takes up structure, weight and material massless, photon generated. The photons of irregular spherical shape, different energy levels they represent. The corresponding energy level fit and having photons are attracted to each other and consecutive weight and massless thin membrane-like structures are clustered.
The electron microscope is an optical photons pass through the lens, and the voltage increases with increasing quantities. The plasma is formed passing through the lens, which again takes up structure, weight and material massless, photon generated. The photons of irregular spherical shape, different energy levels they represent. The corresponding energy level fit and having photons are attracted to each other and consecutive weight and massless thin membrane-like structures are clustered.
The weight and substance without mass minus one atmosphere pressure
is originally equipped
with an air pressure of the atmosphere, so it created a magnetic equilibrium.
The optical lens of
refraction of photons which imitate natural materials
initiate formed therein
which engages the
artificially created over the
lens.
When
you increase
the voltage, higher energy levels of photons flowing
through the lens, and lower energy levels of "natural lens" repeatedly over the
creation of a second, balanced
position set by the weight and
mass of material
without a "natural optical lens." So much so firmly entrenched
natural lens comes out of each other, we make as
many voltage increases, the energy levels will
be resolved in accordance with
one above the other, because the equilibrium position constant
settings.
Attracted to one another, in equilibrium position entrenched stratification of multiple photon refraction
caused by the magnification.
Thirty billion to increase the magnification power of the naturally generated optical system.
The process is carried out repeatedly as many times as the electron microscope is turned on.
When disabled, all distributed.
To the same extent and pace of the voltage and the current sky changes to a sharp picture unfold.
Thirty billion to increase the magnification power of the naturally generated optical system.
The process is carried out repeatedly as many times as the electron microscope is turned on.
When disabled, all distributed.
To the same extent and pace of the voltage and the current sky changes to a sharp picture unfold.
The
voltage rating must equal importance to the current value.
If a convex lens of one or two inches, the natural color of the recall.
110 Volt power to use its best resolution, because this time point, the plasma is the perfect distance from each other, so the sharpest images.
The service light tube is positioned at an angle of 120 degrees, the lens over a lot of light into the material to be examined, with the sharpness of the image is increased.
Large areas of study, the three-dimensional effect to achieve the return 120 Volt shall apply.
If a convex lens of one or two inches, the natural color of the recall.
110 Volt power to use its best resolution, because this time point, the plasma is the perfect distance from each other, so the sharpest images.
The service light tube is positioned at an angle of 120 degrees, the lens over a lot of light into the material to be examined, with the sharpness of the image is increased.
Large areas of study, the three-dimensional effect to achieve the return 120 Volt shall apply.
Micro-organisms observed movement of high
availability, the study of the operator light
angle 110 degrees flat part should be
reduced to 110 volts use the lens and three
inches.
Water proof fabric varieties may be studying the sharper the image.
In addition:
The atmospheric pressure was gradually reduced to 0.81 atm at present whether someone stopped?
Water proof fabric varieties may be studying the sharper the image.
In addition:
The atmospheric pressure was gradually reduced to 0.81 atm at present whether someone stopped?
Nincsenek megjegyzések:
Megjegyzés küldése