If the computer and the monitor's cable are covered with fullerene in the electric
wiring
harness of the plugs, they are loosely packed up to the power plugs,
increasing the
flow rate of the electrons.
Insulation is no longer required as fullerene moves the electrons forward, does not move in
any other direction, has fulleren with the greatest magnetic attraction, so there is no risk
of electric shock. The acceleration speed of the electrons accelerated by fulleren allows
the connection to be established since the signals are first received at 0.1 wavelengths.
Image and voice change will be unambiguously fast, so you will need to slow down.
At the top of the computer at a distance of approx. one piece 3x3 cm magnet should
be placed.
The flow of information signals, the attraction of moving electrons in the
power lines,
provides over the wire. However, the magnet attracts the
information codes towards
itself, and the fullerene is backward.
However, we need to initiate a contact, but we need to initiate our wavelength, and
wait for it, but no response will arrive, so the picture and sound will be displayed.
The information patterns dissipate as a result of magnetic attraction to information patterns
that are once again attracted to fullerene-treated wires. Here they fit into patterns again.
Here they fit into patterns again. The amount of time elapsed during the protuberance and
patterning ensures the traceability of image and sound.
When communication with the wavelength of 0.1 is completed, you need to ask the contact
partners at down. They can receive the information signals there, a minute later, the pictures
transmitted the wavelength of 0.1 to place the computer on the original network,
they are only able to do this.
You will need to remove the magnet from your computer, and you will no longer need
to slow from the wavelength of the caller's computer monitor are displayed with sound.
Nincsenek megjegyzések:
Megjegyzés küldése